Mass Air Flow Sensor for (GW-EFI) Steering Wheel Wraps vehicles fitted with alloy wheels

vehicles fitted with alloy wheels (with an alloy spare) had slightly longer radiator hoses to accommodate the extra distance around the spare

Install tip: Do not exceed 7ft-lbs on the allen bolt

A front end alignment must be performed and the suspension must fully settle (gone over several bumps/cycles) to achieve the desired lowering result

These 1 inch thick polyurethane blocks simply slide over the jack handle and the jack's I" beam to keep them secured together

be sure to support the regulator with a second wrench at the end you are attaching the fitting

Mass Air Flow Sensor for (GW-EFI) Steering Wheel Wraps vehicles fitted with alloy wheelsCarry a spare! If you have our GoWesty Fuel Injection Component Replacement Kit (GW EFI) then this is the required Mass Air Flow Sensor. Note: These sensors are only for use with our fuel injection system, not the original Volkswagen fuel injection.